Numerical modeling for analyzing thermal surface anomalies induced by underground coal fires

Coal seams burning underneath the surface are recognized all over the world and have drawn increasing public attention in the past years. Frequently, such fires are analyzed by detecting anomalies like increased exhaust gas concentrations and soil temperatures at the surface. A proper analysis presumes the understanding of involved processes, which determine the spatial distribution and dynamic behavior of the anomalies.In this paper, we explain the relevance of mechanical and energy transport processes with respect to the occurrence of temperature anomalies at the surface. Two approaches are presented, aiming to obtain insight into the underground coal fire situation: In-situ temperature mapping and numerical simulation. In 2000 to 2005, annual temperature mapping in the Wuda (Inner Mongolia, PR China) coal fire area showed that most thermal anomalies on the surface are closely related to fractures, where hot exhaust gases from the coal fire are released. Those fractures develop due to rock mechanical failure after volume reduction in the seams. The measured signals at the surface are therefore strongly affected by mechanical processes.More insight into causes and effects of involved energy transport processes is obtained by numerical simulation of the dynamic behavior of coal fires. Simulations show the inter-relation between release and transport of thermal energy in and around underground coal fires. Our simulation results show a time delay between the coal fire propagation and the observed appearance of the surface temperature signal. Additionally, the overall energy flux away from the burning coal seam into the surrounding bedrock is about 30-times higher than the flux through the surface. This is of particular importance for an estimation of the energy released based on surface temperature measurements. Finally, the simulation results also prove that a fire propagation rate estimated from the interpretation of surface anomalies can differ from the actual rate in the seam.     

尖吻兽（Akidolestes）的齿列和头后骨骼

尖吻兽（Akidolestes）是新近在中国辽宁省下白垩统义县组地层发现的对齿兽动物,保存了非常完整的头后骨骼。其齿列特征表明它属于鼹兽超科（Spalacotheroidea）中的鼹兽科动物（Spalacotheriidae）,该科是以臼齿齿尖呈对称三角形排列、上下臼齿反转咬合为特征的单系类群,是现生兽类（有袋类和有胎盘类）的近亲,拥有许多兽类骨骼的原始特征。尖吻兽区别于张和兽科的特征是具有更宽大的下颌冠状突和臼齿齿尖呈更小的锐角排列。对尖吻兽的骨骼解剖学和比较形态特征的研究,表明尖吻兽演化模式是一种     

Groundwater recharge of carbonate aquifers of the Silesian-Cracow Triassic (southern Poland) under human impact

A Triassic carbonate unit has been intensively drained by zinc and lead ore mines and numerous borehole fields since the nineteenth century. Its groundwater recharge has increased due to: pumping of water from boreholes, mining activity, and urbanization. An approach to determine the amounts of the recharge at a variety of spatial scales is presented in the paper. Different methods were used to identify and quantify recharge components on a regional and local scale: mathematical modelling was performed for four aquifers included in an aquifer system, an analytical estimation based on the assumption that an average recharge is equal to the average discharge of the hydrogeological system—for six man-made drainage centres, and the method of water level fluctuation (WLF) was applied in one observation borehole. Results of modelling have been supplemented by observation of environmental tracers (δ¹⁸O, δ²H, ³H), noble gases temperatures, and ⁴He_exc in groundwater. The regional aquifer’s current recharge according to estimations performed by means of modelling varies from 39 to 101 mm/year on average. Depending on the aquifer site the average precipitation ranges from 779 to 864 mm/year. In the confined part of the aquifer average recharge ranges from 26 to 61 mm/year. Within outcrops average recharge varies from 96 to 370 mm/year. Current recharge estimated by the analytical method for man-made drainage centres varies from 158 up to 440 mm/year. High values are caused by different recharge sources like precipitation, induced leakage from shallow aquifers, and water losses from streams, water mains and sewer systems. Pumping of water, mining and municipal activities constitute additional factors accounting for the intensified recharge.     

Heat capacity and phase equilibria of wadeite-type K2Si4O9

The low-temperature heat capacity (C _p) of Si-wadeite (K₂Si₄O₉) synthesized with a piston cylinder device was measured over the range of 5–303 K using the heat capacity option of a physical properties measurement system. The entropy of Si-wadeite at standard temperature and pressure calculated from the measured heat capacity data is 253.8 ± 0.6 J mol⁻¹ K⁻¹, which is considerably larger than some of the previous estimated values. The calculated phase transition boundaries in the system K₂O–Al₂O₃–SiO₂ are generally consistent with previous experimental results. Together with our calculated phase boundaries, seven multi-anvil experiments at 1,400 K and 6.0–7.7 GPa suggest that no equilibrium stability field of kalsilite + coesite intervenes between the stability field of sanidine and that of coesite + kyanite + Si-wadeite, in contrast to previous predictions. First-order approximations were undertaken to calculate the phase diagram in the system K₂Si₄O₉ at lower pressure and temperature. Large discrepancies were shown between the calculated diagram compared with previously published versions, suggesting that further experimental or/and calorimetric work is needed to better constrain the low-pressure phase relations of the K₂Si₄O₉ polymorphs. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

南海温跃层基本特征及一维预报模式

根据现有1907—1990年南海大面调查资料,按1°×1°网格进行逐月的标准水层的温度统计。在此基础上采用3次样条函数的插值方法计算出整个南海温跃层的深度、厚度和强度并予以相应分析。分析表明,南海温跃层主要分为两种类型:第一类为辐射型,主要分布在南海北部的陆架区内,季节变化显著;第二类为不同水体叠置型,主要分布在广大深水区,它长年存在,季节变化较小。一种温跃层的一维积分预报模式,该模式是基于忽略热平流作用和水平热扩散的前提下,从局部热平衡方程出发,建立了受海面热收支及风混合作用下求解温度垂直分布及温跃层的时空变化。在南海北部水深约300m处进行了单站温跃层后报,结果表明,温跃层的深度、厚度和强度的相对误差均在30％以下。     

渤海、黄海、东海海面热量平衡的平均状况——Ⅰ.资料处理和计算方法

渤、黄、东海海面热量平衡状况对该海域海洋水文和中国气候有着重要的影响。我们对该海域热量平衡各分量的年平均和年变化进行了计算,并分别就资料处理和计算方法、年平均状况、年变化特征等几个方面进行了分析。本文作为该项研究的第一部分,讨论了所用的资料和计算公式,提出了在稳定温度层结条件下的交换系数的校正方法。     

菲律宾海热含量分布及其变化的初步探讨

本文利用1986年及1987年秋季在菲律宾以东海域进行的CTD观测资料,分析了该海域上层海水热含量分布及变化,得出,热含量由南向北随纬度逐渐增大,这主要是北赤道流引起的等温线自南向北下倾造成的,另外也与南部和北部的冷涡和暖涡有关。本文认为,两年里热含量的差异可能与1986年生成的El Nin有关。另外,北太平洋赤道流体积输送量的变化与菲律宾海热含量的变化也有一定的联系。     

雄性三倍体长牡蛎繁殖潜力的初步研究

国内外很多人做过三倍体长牡砺的诱导工作，但在三倍体性腺发育及配子活力方面的研究，目前仅见Ａｌｌｅｎ等１９８６年和１９９０年对三倍体的海螂和长蛎异常配子的发生报道。Ｃｏｘ１９９６年研究了悉尼岩牡蛎三倍体性腺发育情况，姜卫国等对三倍体合浦珠母贝的生殖腺进行了观察，李霞［１］对三倍体长牡蛎的性腺发育做了较系统的分析和总结。作者用流式细胞仪对长牡蛎Ｃｒａｓｓｏｓｔｒｅａ　ｇｉｇａｓ二、三倍体的性腺细胞进行了初步分析，回答了三倍体长牡蛎生殖潜力及性比方面的一些问题，为进一步研究三倍体长牡蛎的生长、繁殖、杂…     

黑潮区台风域海-气热输送量的计算

根据1972和1974年经过黑潮区的两个台风个例,计算和分析了台风各部位在不同的海气条件下热量输送的垂直分布特点。表明,在台风前部信风带中,热量垂直输送限于700hPa以下,在1000hPa处有约167.47—209.34J/(cm~2·h)的最大值,700hPa以上热量向下输送;在台风中心区,热量输送量最大,在1000hPa处接近420J/(cm~2·h),在850hPa附近可能有热输送量的最大值,其上随高度减小;在台风后部偏南气流中,向上热输送量较小;各层最大值不超过84J/(cm~2·h)。     

Relative molar mass distributions of chromophoric colloidal organic matter in coastal seawater determined by Flow Field-Flow Fractionation with UV absorbance and fluorescence detection

A new method for the characterization of chromophoric colloidal organic matter in seawater has been applied to samples from the Baltic Sea, Kattegatt and Skagerrak seas. Size fractionation of the sample by Flow Field-Flow Fractionation and measurement of the fluorescent and UV absorbing properties of the individual size fractions result in a relative molar mass distribution (RMM) of the optical properties. The RMM distributions have been used to estimate number and weight average relative molar masses, and polydispersity indices. At least two sources of coloured organic matter were identified from the ratio of fluorescence to UV: the Baltic surface water and the Skagerrak deep water. The dominating processes were mixing and dilution, but processes such as photo bleaching of fluorescence are also believed to be important. The RMM distribution derived from UV detection (1150–1300 Dalton) increased with increasing salinity while that derived for fluorescence (1500–1250 Dalton) decreased with increasing salinity. The specific UV absorbance taken as a proxy of the aromaticity of the chromophoric organic material showed decreasing trend with both increasing salinity and increasing UV derived weight average relative molar mass. Increasing polydispersity of the colloidal material was also observed as a function of salinity.